ACCOSSATO RADIAL CLUTCH MASTER CYLINDER
Loved by racers worldwide, the Accossato 16x18 radial clutch master cylinder for sportbikes feature a fixed, standard length RST lever with anti-drag inlet hole. The forged aluminum cylinder is stronger and lighter than stock cast units for maximum reliability. Accossato has been producing Italian made sportbike components for original and aftermarket use since 1969.
This hydraulic clutch master uses a 16mm diameter piston and fixed standard length RST lever which features an anti-drag inlet hole machined into the lever end for the passage of air at high speed.
Accossato produces race quality clutch master cylinders and braking components using a 100% quality-control process mandating all core components to be inspected under a microscope before assembly, pressure calibrated, and vacuum tested upon final assembly.
Fixed Lever: 16x18
Material: Pressure Forged Aluminum
Surface Protection: Anodized
Standard Fixed Lever w/ RST Part#: ACC-LV002N-18-L-RST
Short Fixed Lever Part#: ACC-LV002N-18-C
Exclusive Three (3) Year Limited USA Warranty
ITEMS REQUIRED TO COMPLETE INSTALLATION
We suggest using the Accossato 15ml Clutch Reservoir Mounting Kit (Part# ACC-KITVP) as it includes a reservoir, bracket, hardware and tubing.
The clutch master kit includes a single hole banjo bolt with 2 copper washers.
If you wish to retain the clutch micro-switch functionality you will require a Single Hole Inline Pressure Switch, Banjo Bolt Part#: ACC-ID001.
If you intend to use your stock reservoir you will require a length of 6mm Tygon 2375 Tubing and 2 3/8" Spring Clamps.
Dot 4 Brake fluid will be needed. We suggest replacing all of the fluid in the system when you install the master. Do NOT use Dot 5.1 Brake Fluid.